4th Year Design Projects Supervised

 

1.          Alfio Caradonna and Joe Baker, Parabolic Solar Collector, 2002

2.          Heng Yeang, Robert Tran and Samson Luk , Automotive Engine Cooling System Simulation, 2002

3.          Gianna Fitzpatrick, Study of Red Blood Cell Motion in Turbulent Flow, 2002

4.          Anka Bruic and Velarny Rajakariar, Human Thermal Interaction with an Automobile Passenger Environment, 2001

5.          David Stewart, Mark Johnston and Ira Young, Conversion of a Riding Lawnmower from Gasoline to Propane, 2001.

6.          Maria Shembri, The Experimental Verification of a Fuel Injector Model, 2001

7.          Robert Doiron, Design and Construction of an Automotive Air Induction Component Flow Visualization Facility, 2001.

8.          Michael Lai and Vinh Tran, WAVE Predictions of the Performance of a Single Cylinder Engine, 2000

9.          Scott Ribey, Effects of Compression Ratio on the Performance of an SI Engine, 2000.

10.      Jeff Gibson, Steve Roseborsky, James Woodiwiss , Dan D, Drew Dudgeon and Kevin Roth, Ethanol Vehicle Challenge 2000, 2000.  

11.      Christopher Sak, Automated Capillary Pressure Measurement Device, 2000. 

12.      Rennie Urias-Castillo and An Le, Ricardo WAVE Simulation of a Chevrolet Silverado 5.3 L, V8 Engine, 2000.  

13.      Hamid Aghayan , Todd Tousignant  and Rabih Kobrosy, Simulation of an Automotive Intake Component Flow Visualization Test Facility, 1999.

14.      Paul Paplinski and Peter Heidbuchel, The Effects of Piston Shape on the Performance of an SI Engine, 1999.

15.      Hassan Elsmaili, Experimental Verification of Automotive Fuel Injector Model, 1999.

16.      Tracy Hodge, Non-linear X-wire Anemometer Calibration, 1999.

17.      Kambiz Gharacheh and Rick Corrent, Ricardo WAVE Analysis of a 2 L, 4 Cylinder DOHC Chrysler Neon Racing Engine, 1999.

18.      Yohannes Kibrom, A Monitor and Control System for a Propane Powered Vehicle, 1999.

19.      Mira Bratic and John Feloniuk, Numerical Simulation of an Internal Combustion Engine Using WAVE Software, 1998.  

20.      Michael Brown, Mathematical Model for an Automotive Fuel Injector, 1998.

21.      Egidio Mosca, Conversion and Testing of a Single Cylinder Propane Engine, 1998.

22.      Tom Adamek, Anson Burm, Mark Thompson and Denise Maldonado, Vapour Injection of a One Cylinder Engine, 1998.

23.      Adam Mullis, Matthew Hoag and Jennifer Callaby, Improved Power Output for the 1996 Propane Minivan, 1998.

24.      Michael Sirizzotti and Daniel Fetter, Design, Construction and Testing of a Fan Flow Test Facility, 1998.

25.      Paul Weigel, Percentage Burn of Propane Relative to the Crank Angle, 1998.

26.      Andrea Rowe and Cliff Hammell, Development of a Concentric Tube Heat Exchanger, 1997.

27.      Leo Sandirasegaram, Combustion of Hydrocarbons in an Internal Combustion Engine, 1997.

28.      Bob Archambeault, Effect of Temperature Change on the Performance of an Ultra-filtration System, 1996.

29.      Arthur Arps and Douglas Bain, The Design and Testing of a Propane Operated Engine, 1996.

30.      Kent Mok and Benny Ng, A Jet Impact Test Facility for the Fluid Mechanics Laboratory, 1996.

31.      Claudette Kennette, Modification of the Undergraduate SI Engine Laboratory, 1996.

32.      Alan Buneta and Daniel Demers, Sonic Jet-Ski Nozzle, 1995.

33.      Jason Hallyburton and Marinko Mustapic, Simulation of Fluid Flow in a Two-dimensional System, 1995.

34.      William Lau and Chin Hwee Huang, Study of the Static and Dynamic Characteristics of a Pressure Signal Generator, 1994.

35.      Peter Najem, Transient Response of a Vortex Diode, 1994.

36.      Alf Hunter and Chris Franklin, A Feasibility Study of an Air Vortex Ring Generator, 1994.

37.      Brad Randall and Tom Recchia, Fluidic Capillary Pyrometer in a High Temperature Environment, 1994.

38.      Erik Baumgartner and Marco Bello, Design of an Automotive Parts Washer, 1994.

39.      Brad Lachance and Chuck Krekewich, Pulsatile Flow Simulation System, 1993.

40.      Thomas Behr and Steven Gibson, An Experimental Study of Electro-viscous Fluid Flows, 1992.

41.      Robert Majka and Chris Dowson, CFD Simulation of a Proportional Fluidic Device, 1992.

42.      Khorram Khoshaien and Quang-Chieu Chau, Computational Fluid Dynamic Study of the Flow Through a Fluidic Device, 1991.

43.      Colin Novak and Todd Mattiuz, Simulation of Pulsatile Flow in the Aorta, 1991.

44.      Sam Leong and Ray Choy, Visualization of a Steady Laminar Flow Through a Fluidic Device, 1991.

45.      Patrick Ng and Tony Yeong, The Performance of a Vortex Amplifier: The Effect of Flow Symmetry, 1989.

46.      Wai-Kit Tse and Wai-On Yiu, An Experimental Study of a Vortex Amplifier: Effect of Receiver Tube Geometry, 1989.

47.      Yiu-Ming Lee and Wai-Hong Wong, An Experimental Study of a Vortex Amplifier: Effect of Receiver Tube Geometry, 1989.

48.      Ian Basham and William Klym, Study of a Turbulent Water Jet Using Laser Doppler Anemometry, 1986.

49.      Dave Heckadon and Sung Wong, An Experimental Study of Vibrating Hot-wire Characteristics, 1986.

50.      Henry Konkan and Kamran Azimi, An Experimental Study of the Velocity Profile in the Fully Developed Region of a Turbulent Jet Using a Laser Doppler Anemometer, 1985.

51.      Robert Lee and Roden Lee, Computer Aided Flow Visualization of the Die Swell, 1985.

52.      Glenn Ray and Steve Lesiuta, Computer Aided Turbulence Measurements, 1984.

53.      Dominic Coletta and Michael Shannon, The Golf Analyser, 1984.

54.      Hon Chong Chow and Teong King Hue, Vibrating Method of Calibrating a Hot-wire Anemometer at Low Speeds, 1984.

55.      Daniel McNamara and Hwai Hai Chiang, Automated Capillary Tube Viscometer, 1984.

56.      Harry Hong and Phil Fung, Primary Normal Stress Difference of Non-Newtonian Fluid, 1984.

57.      Ronald Leung and Alex Tsui, Experimental and Analytical Investigation of Flow Pattern Resulting from Two Impinging Water Jets, 1983.

1.          Kevin Elliot, An Experimental Study of an Electronic Fluidic Pressure Generator, 1983.

2.          Jim Proctor, Fluidic Jet Oscillator, 1983.

3.          Jeff Golden and Rolf Reidel, The Assembly and Testing of Fluidic Devices, 1983.

4.          Raphael Pittaluga, Rheological Properties of Newtonian and Non-Newtonian Fluids., 1982.

5.          Stephen Burks, An Experimental Investigation of a Fluidic Oscillator, 1982.

6.          Michael Nageleisen and Nicholas Ritter, Microcomputer Control of a Hydraulic Test Bed, 1982.

7.          Seyed Massoud-Hossieni Aliabad, Fluidic Temperature Sensor using Capillary Tubes with a Cyclic Pressure Variation, 1982.

8.          Evans Luo and Michele DeMarco, Experimental Study of a Static Pressure Probe Insensitive to Flow Direction, 1982.

9.          George Vrantsidis, Introduction to the Theory of Lubrication, 1981.

10.      Blaise Ng, An Experimental Study of the Cleaning Action of a Pulsating Jet, 1980.