Refereed Journal Papers
1.
Rankin,
G.W. and K.
Sridhar, 1976, Static Characteristics of Shrouded Acoustically Controlled Turbulence
Amplifiers, ASME Journal of Fluids Engineering, 98, pp. 476‑482.
2.
Rankin,
G.W. and K. Sridhar, 1978, Developing Region of Laminar Jets with Uniform Exit
Velocity Profiles, ASME Journal of Fluids Engineering, 100, pp. 55‑59.
3.
Rankin,
G.W. and K. Sridhar, 1981, Developing Region of Laminar Jets with Parabolic
Velocity Profiles, ASME Journal of Fluids Engineering, 103, pp. 322‑327.
4.
Arulraja,
M., G.W. Rankin and K. Sridhar, 1983, Maximum Velocity
Decay in a Submerged Laminar Jet Issuing from a Long Tube, Transactions of the
CSME, 7, 1, pp. 41‑43.
5.
Swaminathan,
M.K., R. Bacic, G.W. Rankin and K. Sridhar, 1983, Improved Calibration of Hot‑Wire
Anemometers, Journal of Physics E. Scientific Instruments, 16, pp. 335‑338.
6.
Chandna,
O.P., A. Murgai and G.W. Rankin, 1983, Steady
Rotational Plane Gas Flow Problem by Hodograph Method, International Journal of
Engineering Science, 21, 1443‑1449.
7.
Rankin,
G.W., K. Sridhar, M. Arulraja and K.R. Kumar, 1983,
An Experimental Investigation of Laminar Axisymmetric Submerged Jets, Journal
of Fluid Mechanics, 133, 217‑231.
8.
Kumar,
K.R., G.W. Rankin and K. Sridhar, 1984, Laminar Length of a Non‑Newtonian
Fluid Jet, Journal of Non‑Newtonian Fluid Mechanics, 15, 13‑27.
9.
Swaminathan,
M.K., G.W. Rankin and
K. Sridhar, 1984, Some Studies on Hot‑Wire Calibration
Using Monte Carlo Technique, Journal of Physics E. Scientific Instruments, 17,
1148‑1151.
10. Swaminathan, M.K., G.W. Rankin and K. Sridhar, 1986, A
Note on the Response Equations for Hot‑Wire Anemometry, ASME Journal of
Fluids Engineering, 108, 115‑118.
11. Swaminathan, M.K., G.W. Rankin and K. Sridhar, 1986,
Evaluation of the Basic Systems of Equation for Turbulence Measurements Using
Monte Carlo Technique, Journal of Fluid Mechanics, 170, 1‑19.
12. Rankin, G.W., H. Sabbah and P. Stein, 1989, A Streaming
Birefringent Study of the Flow at the Junction of the Aorta and the Renal
Arteries, Experiments in Fluids, 7, 73‑80.
13. Kumar, K.R., G.W. Rankin and K. Sridhar, 1989, Fully Developed Flow
of Power‑Law Fluids in Curved Ducts with Heat Transfer, Numerical Heat
Transfer, Part A, vol. 16, pp 101‑118.
14. Jordan, C., G.W. Rankin and K.
Sridhar, 1992. A Study of Submerged Pseudoplastic Laminar Jets, Journal of
Non-Newtonian Fluid Mechanics, 41, 323-337.
15. Sun, Y, Hearshen, D.O., Rankin,
G.W. and Haggar, A.M., 1992. Comparison of Velocity-encoded MR Imaging and
Fluid Dynamic Modeling of Steady Disturbed Flow, Journal of Magnetic Resonance
Imaging, 2, No.4, 443-452.
16. Sabbah, H.N., M.S. Hamid, G.W. Rankin
and P.D. Stein, 1993. A Model of Phasic Arterial and Venous Blood Flow in the
Coronary Circulation, Computers and Structures, 46, 4, 741-749.
17. Kurada, S., G.W. Rankin and K.
Sridhar, 1993. Particle Imaging Techniques for Quantitative Flow Visualization:
A Review, Optics
and Laser Technology, 25, no. 4, 219-233.
18. Karanth, D., G.W. Rankin and K.
Sridhar, 1994. A Finite Difference Calculation of Forced Convective Heat
Transfer from an Oscillating Cylinder, International Journal of Heat and Mass
Transfer, 37, no. 11, 1619-1630.
19. Kurada, S., G.W. Rankin and K.
Sridhar, 1994. Flow Visualization using Photochromic Dyes: A Review, Optics and
Lasers in Engineering,
20, 177-192.
20. Kurada, S., G.W. Rankin and K.
Sridhar, 1995. A Trinocular Vision System for Close- Range Position Sensing,
Optics and Laser Technology, 27, no. 2, 75-79.
21. Damodaran, V., C. Zhang and G.W.
Rankin, 1995, Comparison of k-ε Turbulence Models for Pipe Flows, Mathematical Modeling
and Scientific Computing, 5, 1, 57-72.
22. Karanth, D., G.W. Rankin and K.
Sridhar, 1995. Computational Study of Flow Past a Cylinder with Combined
In-line and Transverse Oscillation, Computational Mechanics, 16, 1-10.
23. Damodaran, V., G.W. Rankin and C. Zhang, 1996, Numerical Study of Steady Laminar Flow Through
Tubes with Multiple Constrictions Using Curvilinear Coordinates, International
Journal for Numerical Methods in Fluids, 23, 10, 1021 - 1041.
24. Kurada, S., G.W. Rankin and K.
Sridhar, 1997, A New Particle Image Velocimetry Technique for Three-dimensional
Flows, Optics and Lasers in Engineering, 28, 343 - 376.
25. Damodaran, V., G.W. Rankin and C. Zhang,
1999, Effect of Moving Boundary on Pulsatile Flow of Incompressible Fluid in a
Tube, Computational Mechanics, 23, 20-32.
26. Fackrell, S., M. Mastroianni and G.W. Rankin, 2003, Model of the
Filling of an Automotive Fuel Tank, Mathematical and Computer Modelling, 38,
519-532.
27. Liu, R.,
D.S-K. Ting and G.W. Rankin, 2004, On the Generation of Turbulence with a
Perforated Plate, Experimental Thermal and Fluid Science, 28, 4, 307-316.
28. Damodaran, V., C. Zhang and G.W. Rankin, 2004, Effect of a
Time-dependent Constriction on Pulsatile Flow of Incompressible Fluid in a Tube, Transactions
of the Canadian Society for Mechanical Engineering, 28, 2B, 277-289 (Received
2004 Best Paper Award in the CSME Transactions).
29. Walgama, C., Fackrell, S., Karimi, M., Fartaj,
A. and G.W. Rankin, 2006, Passenger Thermal Comfort in Vehicles-A Review, Proc.
IMechE Part D: Journal of Automobile Engineering, 220, 543-562.
30. Kergourlay, G., Kouidri, S., Rankin, G.W. and Rey, R., 2006,
Experimental Investigation of the 3D Unsteady Flow Field Downstream of Axial
Fans, Journal of Flow Measurement and Instrumentation,
17 (5), 303-314.
31. Karimi, M., Fartaj, A., Rankin, G.W.,
Vanderzwet, D., Birtch, W. and Villafuerte, J., 2006,
Numerical Simulation of the Cold Gas Dynamic Spray Process, Journal of Thermal
Spray Technology, 15, 4, 518-523.
32. Doroshko, M.V., Penyazkov, O.G.,
Rankin, G., Sevruk, K.L., Khramzov,
P.P., and Shikh, I.A., 2006, Talbot Interferometry in
Measurements of the Parameters of an Axisymmetric Turbulent Jet, International
Journal of Engineering Physics and Thermophysics, 79,
5, 937-942 (Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 79, No. 5, pp. 94–99, September–October, 2006).
33. Sak, C., D.S-K. Ting and G.W. Rankin, 2007, The Role of
Turbulence Length Scale and Turbulence Intensity on Forced Convection from a
Heated Circular Cylinder, Experimental Thermal and Fluid Science Journal, 31,
279-289.
34. Hamoudi, A.F., Fartaj, A. and Rankin,
G.W., 2008, Performance Characteristics of a Micro-scale Ranque-Hilsch Vortex Tube, Journal of Fluids Engineering, 130, 10,
8 pages.
35. Karimi, M., Jodoin, B. and Rankin, G.W., 2011, Shock-wave Induced Spraying: Modeling and Physics of a New
Spray Process, Journal of Thermal Spray Technology, 20, 4, 866-881.
36. Lin, F., Rankin, G.W., 2011, An Efficient Numerical Model
To Determine Synthetic Jet Ejector Performance,
American Institute of Physics Conference Proceedings, 1389, 139-142,
doi:10.1063/1.3636689.
37. Mastroianni, M., Savoni, L.,
Henshaw, P. and Rankin, G.W., 2011, Experimental Study
of Fuel Tank Filling, World Academy of Science, Engineering and Technology
Journal, 58, 371-378.
38. Karimi M., Jodoin B, Rankin GW, 2012, Shock-wave
Induced Spraying: Gas and Particle Flow and Coating Analysis. Surface and
Coatings Technology. 207: 435-442.
39. Aczel A, Karimi M, Rankin, G. 2013, Effect of Boundary
Conditions on Room Ventilation Simulation Uncertainty. International Journal of
Surface Engineering and Materials Technology. 3(2): 34-38.
40. Karimi M, Rankin G., Fartaj A, 2014, Parametric Study of Exhaust Pattern in Cold
Spray Using CFD and Particle-Wall Impact Analysis. Journal of Applied Fluid
Mechanics, 7, 1, 75-87.
41. Roy, P., Bourgault, A.J., Towhidi,
M., Song, P., Li, Z., Mukundan, S., Rankin, G.W. and Kar, N.C. 2020, An
Algorithm for Effective Design and Performance Investigation of Active Cooling
System for Required Temperature and Torque of PM Traction Motor
IEEE Transactions on Magnetics PP(99):1-1, DOI:10.1109/TMAG.2020.30173830.
42. P. Kumar,B. Balasingam and G.W. Rankin. (2022). A Comparison of Three
Strategies: Electric vehicles battery cooling strategies and use of
nanomaterial for performance enhancement. IEEE Electrification Magazine. 10(4):
77 - 83.
43. S. Xu*, E. Ryzer and G.W. Rankin. (2022). A Robust
Pseudo-3D Computational Fluid Dynamic Approach for Industrial Applications.
Journal of Fluids Engineering. 144(9): 094502 (6 pages)
44. B. Balasingam, P. Kumar and G.W.
Rankin. (2022). Battery Fuel Gauge: A Crucial Element in Battery Management
Systems. IEEE Instrumentation & Measurement Magazine. 25(7): 14 - 20.
45. P. Kumar*, G. Rankin, K.R. Pattipati,
B. Balasingam. (2022). Model Based Approach to Long Term Prediction of Battery
Surface Temperature. IEEE Journal of Emerging and Selected Topics in Industrial
Electronics. 4(1): 389-399.
46. S. Xu*, E. Ryzer and G.W. Rankin. (2022). An
Investigation of a Newly Developed Bistable Load-Type Supersonic Fluidic
Oscillator for Generating Large-Amplitude Pressure Pulsations. Journal of
Fluids Engineering. 145(5): 051201 (15 pages).
47. S. Xu, E. Ryzer and G.W. Rankin.
(2023). Novel Equivalent Circuit Model for a Load-type Bi-stable Supersonic
Fluidic Oscillator. ASME Journal of Dynamic Systems, Measurement and Control.
145(3): 031005 (10 pages).
48. S. Xu, C. Peirone, E. Ryzer, G.W. Rankin, (2024). An
investigation of a supersonic fluidic oscillator generating pulsations in
chambers during pressurization, European Journal of Mechanics - B/Fluids, (103),
100-115.