1. Rankin, G.W.
and K. Sridhar, An Investigation of the Dynamic Response of an Acoustically Controlled
Turbulence Amplifier, Paper B1, Sixth Cranfield Fluidics Conference, Cambridge,
England, March 1974.
2. Rankin, G.W.
and K. Sridhar, Static Characteristics of Shrouded Acoustically Controlled
Turbulence Amplifiers, Paper 75‑WA/Flcs‑9, ASME Winter Annual
Meeting, Houston, Texas, December 1975.
3. Rankin, G.W.
and K. Sridhar, Developing Region of Laminar Jets with Parabolic Velocity
Profiles, Paper 81‑FE‑3, Joint Applied Mechanics, Fluids
Engineering and Bioengineering Conference, Boulder, Colorado, June 1981.
4. Rankin,G.W. and K.
Sridhar, A Discussion of Momentum Conservation in a Laminar Jet, Fifth Canadian
Fluid Dynamics Conference, Windsor, Ontario, Canada, June 1982.
5. Arulraja, M., G.W.
Rankin and K. Sridhar, A Simple Model for the Laminar Jet Developing Region,
Paper Bl, Ninth International Fluidics "Jablonna"
Conference, Jablonna, Poland, September 1982.
6. Kumar, K.R.,
G.W. Rankin and K. Sridhar, A Note on Transition in a Free Submerged Laminar
Jet of a Pseudoplastic Liquid, 18th Midwestern Mechanics Conference, Iowa City,
Iowa, May 1983.
7. Kokate, P., G.W.
Rankin and K. Sridhar, Some Characteristics of a Constant Temperature
Anemometer with Two Hot‑Wires in Series, 12th Southeastern Conference on
Theoretical and Applied Mechanics (SECTAM XII),
8. Chiang, H. D.
McNamara, G.W. Rankin and K. Sridhar, Automated Capillary Tube Viscometer,
Western Michigan Conference on Mechanical Engineering,
9. Jim, E., J. Shiu, G.W. Rankin and K. Sridhar, Effect of Supply Tube
Length on Natural Laminar Jet Length, 13th National Conference on Fluid
Mechanics and Fluid Power, Tiruchirapalli, Tamil
10. Hong, H., P.
Fung, R. Ing, R. Lee, G.W. Rankin and K. Sridhar, Computer Aided Flow
Visualization of the Die Swell, Symposium on Physical and Numerical Flow
Visualization, ASME Fluids Engineering Conference, Albuquerque, New Mexico,
June 1985.
11. Kumar, K.R.,
R.M. Barron, G.W. Rankin and K. Sridhar, Numerical
Study of Fully Developed Non‑Newtonian Fluid Flow Through Curved Ducts,
Fourth International Conference on Numerical Methods in Laminar and Turbulent
Flow, Swansea, U.K., July 1985.
12. Fernandez,
V.M., G.W. Rankin, K. Sridhar and M.K. Swaminathan, Response of an Oscillating
Hot‑Wire, International Symposium on Fluid Control and Measurement,
13. Golden, J., C.
Jordan, A. Tsui, G.W. Rankin and K. Sridhar, Effect
of Jet Inclination on It's Natural Laminar Length, International Symposium on
Fluid Control an Measurement,
14. Swaminathan,
M.K., G.W. Rankin and K. Sridhar, Validity of the Hot‑Wire Data
Corrections for High Intensity Turbulence, International Symposium on Fluid
Control and Measurement,
15. Jordan, C.,
G.W. Rankin and K. Sridhar, Laminar Non‑
Newtonian Jet with a Uniform Exit Profile, l3th Southeastern Conference on
Theoretical and Applied Mechanics (SECTAM XIII), Columbia, South Carolina,
April 1986.
16. Swaminathan,
M.K., G.W. Rankin and K. Sridhar, Experimental Evaluation of Signal
Interpretation Methods for Turbulence Measurements. Presented at the AIAA 25th Aerospace meeting,
Reno, Nevada, January 1987.
17. Kumar, K.R.,
G.W. Rankin and K. Sridhar, A Note on the Calculation of Velocity Correction to
Enforce Mass Conservation in Internal Flows.
Presented at 20th Midwestern Mechanics Conference, Purdue University,
West Lafayette, Indiana, 1987.
18. Kumar, K.R.,
G.W. Rankin and K. Sridhar, Flow Through Curved Ducts of Decreasing Area, AIAA
Paper No. AIAA‑87‑2169.
Presented at the AIAA/SAE/ASME/ASEE 23rd Joint Propulsion Conference
held in San Diego, California, July 1987.
19. Jordan, C.,
G.W. Rankin and K. Sridhar, A Laser Doppler Anemometer
Study of a Non‑Newtonian, Polymer Jet, Symposium on Laser
Anemometry: Jets, Boundary Layers, and
Two‑Phase Flows, American Society of Mechanical Engineers Winter Annual
Meeting, Boston, MA., December 1988.
20. Rankin, G.W.,
H. Sabbah and P. Stein, A Streaming Birefringent Flow
Visualization Study of the Renal Arteries and Descending Aorta. Presented at the 7th ASCE/EMD Specialty
Conference,
21. Hearshen, D.O., Y. Sun,
H. Sabbah, G.W. Rankin, A.M. Haggar and P. Stein,
Visualization of Disturbed Flow Using Cardiac Synchronized Fast Magnetic
Resonance Imaging, Presented at the Seventh Annual Meeting of the Society of
Magnetic Resonance in Medicine, San Francisco, California, August 1988.
22. Leung, Y.K., G.
Delaire, G.W. Rankin and K. Sridhar, An Experimental
Investigation of the Effects of Pseudoplasticity on the Performance of Vortex
Amplifiers. Presented at the International Symposium on Fluid Control and
Measurement, Sheffield, England, September 1988.
23. Hearshen, D.O., Y. Sun,
H.N. Sabbah, G.W. Rankin, A. Haggar and P. Stein,
Visualization of Disturbed Flow Using SE and CINE MR
Imaging, Presented at the 74th Scientific Assembly of the Radiological Society
of North America,
24. Sabbah, H.N., M.S.
Hamid, G.W. Rankin and P. Stein, An Electric Analog
Model of the Arterial and Venous Coronary Circulation, Presented at the
Federation of American Societies for Experimental Biology 73rd Annual Meeting,
New Orleans, Louisiana, March 1989.
25. Sabbah, H.N., M.S. Hamid, G.W. Rankin
and P. Stein, Phasic Waveforms of Coronary Arterial and Venous Blood Flow
Predicted by a Numerical Model of the Coronary Circulation, Presented at the
2nd International Symposium on Biofluid Mechanics and Biorheology,
26. Yee, S., D. Hearshen, G.W. Rankin and A.M. Haggar, A Comparison of
Fluid Dynamic Modelling of Flow with MR Velocity Encoded GRASS, Presented at
the 9th Annual Meeting of the Society of Magnetic Resonance in Medicine,
27. Rankin, G.W.,
D.R. Bell, H.N. Sabbah and P.D. Stein, Comparison of
Experimental and Theoretical Phasic Velocity Profiles in the Abdominal Aorta, Presented at the 3rd International Conference on
Physiological Fluid Dynamics held in Madras, India, November 30 - December 3,
1991 (also in the book Physiological Fluid Dynamics III, N.V.C. Swamy and Megha Singh (Eds.) Springer-Verlag, Berlin, pp. 149-156,
1992).
28. Gowda, B.H.L.,
G.W. Rankin and K. Sridhar, Computation of Flow Through a Severe Plane
Rectangular Constriction, Presented at the 3rd
International Conference on Physiological Fluid Dynamics held in Madras, India,
November 30 - December 3, 1991 (also in the book Physiological Fluid Dynamics
III, N.V.C. Swamy and Megha Singh (Eds.)
Springer-Verlag, Berlin, pp. 132-137, 1992).
29. Karanth, D., S. Massoud Hosseini, G.W. Rankin and K. Sridhar, Fluidic
Capillary Pyrometers with Pulsating Flow: A Theoretical Evaluation, Presented at the Second Caribbean Conference on Fluid
Dynamics held in
30. Larijani, R.F.,
G.W. Rankin and K. Sridhar, Investigation of a Fourier Filtering Technique for
Two-Dimensional Velocity Measurement, Presented at The Sixth International
Symposium on Flow Visualization to be held in Yokohama, Japan 5-9 October 1992.
31. Karanth, D., G.W. Rankin and K. Sridhar, Numerical Simulation of Flow Past an
Oscillating Cylinder, ASME Forum on Unsteady Flows, Washington, D.C., 20-24
June 1993 (also in the book Forum on Unsteady Flows- 1993, Edited by W.L. Keith
and T. Wei, ASME FED - Vol.157, pp. 167-175, 1993).
32. Gowda, B.H.L.,
G.W. Rankin and K. Sridhar, Computation of Flow Through a Plane Rectangular
Restriction, 8th International Conference on Numerical Methods in Laminar and
Turbulent Flow, Swansea, Wales, 19-23 July 1993.
33. Karanth, D., G.W.
Rankin and K. Sridhar, Computational Investigation of Heat Transfer from a
Cylinder with In-line and Transverse Oscillation, Proceedings of the Second
Annual Conference of the CFD Society of Canada, University of Toronto, Toronto,
Ontario, June 1-3, 1994.
34. Kurada, S.,
G.W. Rankin and K. Sridhar, A Micro Computer-based Photogrammetric System for
3-D Vision, Proceedings of the CSME Forum 1994, Volume 1, McGill University,
Montreal, Quebec, June 27-29, 1994.
35. Brown, M.C. and
G.W. Rankin, Analytical Model of an Automotive Fuel Injector, Eighteenth IASTED
International Conference on Modelling, Identification and Control, Innsbruck,
Austria, February 15 - 18, 1999.
36. Fackrell, S.A., M.
Mastroianni, G.W. Rankin, L. Savoni, K. Amellal, Modeling of Automotive Fuel Tank Refilling,
Proceedings of the 20th Southeastern Conference on Theoretical and Applied
Mechanics (SECTAM XX), Pine Mountain, Georgia, May 16-18, 2000.
37. Zhao, A.G.,
R.M. Barron and G.W. Rankin, Systematic Grid Convergence Studies and Error
Estimates of Numerical Solutions of the Exit Region of Submerged Laminar Jets,
Proceedings of the 20th Southeastern Conference on Theoretical and Applied
Mechanics (SECTAM XX), Pine Mountain, Georgia, May 16-18, 2000.
38. Karbassian, A., Ahmadi,
M. and G.W. Rankin, Application of Digital Filtering in Whole Field Evaluation
of PIV Images, Proceedings of the IASTED International Conference on Applied
Simulation and Modelling (ASM 2000) held in Banff, Alberta, Canada from July
24-26, 2000.
39. Zhao, A.G., M.
Mastroianni, L. Savoni and G.W. Rankin, Automotive
Fuel Tank Filling: A Preliminary Investigation, Proceedings of the Ninth Annual
Conference of the CFD Society of Canada, pp. 231-236, Ed. G.E. Schneider,
Waterloo, Ontario, May 27-29, 2001.
40. Barron, R.M.,
A. El Saheli, H. Yang and G.W. Rankin, Effect of Boundary Conditions on
Numerical Simulation of Automotive Fan Text facility, Proceedings of the Ninth
Annual Conference of the CFD Society of Canada, pp. 300-305, Ed. G.E. Schneider, Waterloo,
Ontario, May 27-29, 2001.
41. Karbassian, A., M.
Ahmadi, G.W. Rankin and R. Hashemian,
Application of 2-D Filtering in Determination of the Velocity of Flow Fields,
Proceedings of the 2001 IEEE Pacific Rim Conference on Communications, Computers
and Signal Processing (PACRIM >01), August 26-28, 2001, Victoria, B.C.,
Canada.
42. Zhao, A.G., M. Mastroianni, L. Savoni , H. Atsbha and G.W. Rankin, Automotive Fuel Tank Filling: a
Hybrid Numerical Study, CFD 2002 The
Tenth Annual Conference of the CFD Society of Canada, June, 2002, Windsor,
Ontario.
43. Sak, C., R. Liu,
D.S-K. Ting & G.W. Rankin, The Effect Of
Turbulence On Forced Convection From A Heated Horizontal Circular Cylinder, 6th
ASME-JSME Thermal Engineering Joint Conference, March 16-20, 2003,
44. Karimi Esfahani, M.,A.
Fartaj and G.W. Rankin, Predicting Optimum Vortex Tube Performance
Using a Simplified CFD Model, Proceedings of the 12th Annual Conference of the
CFD Society of Canada, Ottawa, Ontario, May 9-12, 2004.
45. Kergourlay, G., Kouidri,
S., Rankin, G.W. and Rey, R., 3D Structure of the Rotor Wake of a Three
Different Sweep Axial Fan, ASME Paper FEDSM2005-77284, ASME Forum on Fluid
Measurements and Instrumentation, 2005 ASME Fluids Engineering Division
Summer Meeting, Houston, Texas, June 19-23, 2005.
46. Karimi, M., Rankin, G.W. and A. Fartaj, A Numerical Investigation Of
The Flowfield Of A Supersonic Jet Impinging On A Flat
Plate, Proceedings of the 13th Annual Conference of the CFD Society of Canada,
St. John’s, Newfoundland, July 31- August 3, 2005.
47. Karimi, M., Rankin, G.W. and Fartaj, A., Vanderzwet,
D., Villafuerte, J., and W. Birtch, Numerical
Simulation of the Cold Gas Dynamic Spray Process, Proceedings of the International Thermal Spray
Conference and Exposition (ITSC), May 15-18, 2006.
48. Karimi, M., Rankin, G.W. and A. Fartaj, An Efficient Method of Lagrangian
Particle Tracking in Symmetrical Flows, Proceedings of the 14th Annual Conference of the CFD
Society of Canada, Kingston, Ontario, July 16 - 18, 2006.
49. Hamoudi, A., Fartaj,
A. and G.W. Rankin, An Investigation Of A Micro-scale Ranque-Hilsch Vortex Tube, Proceedings of the Forum on
Fluids Engineering in Micro- and Nano-systems at the 2006 ASME International
Mechanical Engineering Congress & Exposition, Chicago, IL in November 2006.
50. Kaloni, P.N., Lin, F.
and Rankin, G.W., Heat Transfer Enhancement In Pipe
Flow Problems Of A Magnetic Fluid, Proceedings of IMECE2007 2007 ASME
International Mechanical Engineering Congress and Exposition, November 11-15,
2007, Seattle, Washington, USA.
51. Karimi, M., Rankin, G.W. and Jodoin, B, 2011,
Simulation and Post-processing of Transient Compressible Flow in a Long Tube,
Proceedings of the CFD Society Conference held in Montreal Quebec, April 27-29,
2011.
52. Karimi, M., Rankin, G.W. and Jodoin, B, 2011, Shock-wave Induced Spraying: Modeling and Physics of a New
Spray Process, Proceedings of the International Thermal Spray Conference 2011
on September 27 - 29, 2011 in Hamburg, Germany
53. Karimi, M., Rankin, G.W. and Jodoin, B.,
2012, Prediction of Coating Formation in Shockwave-Induced Spray Process
Through Modeling, Submitted for Publication in the Proceedings of the International Thermal Spray
Conference and Exposition (ITSC), May 21-24, 2012 in Houston, Texas.
54. Karimi M., Jodoin B, Rankin GW, 2012,
"Influence of Spray Variables on the Performance of the Shockwave Induced
Spraying Process", International Thermal Spray Society; North American Cold,Spray Conference (NACS),
Worcester, United States, 2012-10-30.
55. Martins J.P., Karimi M., Rankin G., 2013, "Simplified Numerical
Simulation of Produce Cooling Tunnel", 21st Annual Conference of the CFD
Society of Canada, Sherbrooke, Canada, 2013-05-06.
56. Aczel A., Karimi M.,
Rankin G., 2013, "Effect of Boundary Condition Variation on Room
Ventilation Simulation Uncertainty", Proceedings of the International
Conference on Advancements and Futuristic Trends in Mechanical and Materials
Engineering, Jalandhar, India, 2013-10-03 (392-396).
57. Beneteau
D, Mrozinski K. Rankin G, Jodoin
B., 2014, "Shock Induced Spray Process: Flow Visualization of the
Substrate Impact Region", Proceedings of the Canadian Society for
Mechanical Engineering International Congress, Toronto, Canada, 2014-06-01
(1-6).
58. Martins, J.P.* and Rankin, G.W., 2015, An Investigation of Produce Cooling
Tunnel Performance. Conference Proceedings. 11th International Conference on
Heat Transfer, Fluid Mechanics and Thermodynamics, Skukuza,
Kruger National Park, South Africa (737-742).
59. Gill, R.*, Defoe, J. and Rankin, G.W., 2016, A
Combined Numerical and Experimental Assessment of Air and Dust Flow in a
Low-Reynolds Number Valve Including Modifications to Prevent Valve Seal
Contamination. Proceedings. ASME 2016 Fluids Engineering Summer Meeting,
Washington, United States.
60. Xu, S.*, Martins, J.P.* and Rankin, G.W., 2017, A Simple Hybrid
Numerical Model of a Supersonic Fluidic Oscillator. Proceedings. CFD Society of
Canada, Windsor, Ontario, Canada (Paper 334 - 7 pp.)
61. Xu, S.*, Pomerleau-Perron, P.* and Rankin, G.W., 2017, Simplified
Transient Numerical Model of a Supersonic Jet Impacting a Substrate.
Proceedings. American Society of Mechanical Engineers Fluids Engineering Summer
Meeting 2017, Waikoloa, Hawaii, United States (Paper 69314 - 7pp.)
62. Rankin, G.W., 2017, Futuristic Thermo-fluid Mechanics Research.
Proceedings. International Conference on Advancements and Futuristic Trends in
Mechanical and Materials Engineering, Chandigarh, India (5 pp)
63. Alaswad, Z.* and Rankin, G.W., 2018, Numerical Simulation of Vortex-Ring
Mixing of a Thermally Stratified Environment. Conference Proceedings.
International Conference of Numerical Analysis and Applied Mathematics 2018
(ICNAAM 2018):, Rhodes, Greece (1-6),
64. Alaswad, Z.*, Saini, P.* and Rankin, G.W., 2019, Computational fluid
dynamic model of a synthetic jet ejector and test facility. Conference
Proceedings. 14th International Conference on Heat Transfer, Fluid Mechanics
and Thermodynamics, Wicklow, Ireland (1-6)
65. Sidhu, L.S.*, Peirone, C.*, Xu, S.* and Rankin, G.W., 2019, Comparison
of hybrid multi-dimensional numerical models of a bi- stable load- switched
supersonic fluidic oscillator. Conference Proceedings. 14th International
Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2019), Wicklow, Ireland
66. Kumar, P., Balasingam, B., Rankin, G., and Pattipati,
K.,2021, "Battery Thermal Model
Identification And Surface Temperature Prediction," IECON 2021 – 47th
Annual Conference of the IEEE Industrial Electronics Society, pp. 1-6, doi: 10.1109/IECON48115.2021.9589908.