Billinghurst, Robert Gordon; B.A.Sc., M.A.Sc. (Toronto), P.Eng.—1957.
Colborne, William George; B.Sc., M.Sc. (Queen's), P.Eng.—1958.
Reif, Zygmunt Francis; B.Sc. (Eng.), Ph.D. (London), P.Eng.—1969.
McDonald, Thomas William; B.Sc., M.Sc. (Queen's), Ph.D. (Purdue), P.Eng.—1968.
Sridhar, Krishnaswamy; B.Sc. (Madras U.) D.M.I.T. (Madras Inst. of Technology), M.A.Sc., Ph.D. (Toronto), P.Eng.—1963.
North, Walter P.T.; B.Sc. (Queen's), M.Sc. (Saskatchewan), Ph.D. (Illinois), P.Eng.—1965.
Youdelis, William V.; B.Sc. (Alberta), M.Eng., Ph.D. (McGill), P.Eng.—1965.
Watt, Daniel Frank; B.Sc. (Alberta), Ph.D. (McMaster), P.Eng.—1969.
Northwood, Derek Owen; B.Sc. (Eng.), A.R.S.M. (London), M.Sc. (Part I), Ph.D. (Surrey), F.I.M., F.A.S.M., FIMMA, F.I.E. Aust., CP Eng (Australia), P. Eng.—1976.
Rankin, Gary W.; B.A.Sc., M.A.Sc., Ph.D. (Windsor), P. Eng.—1980.
Wilson, Norman W.; B.Eng., M.Eng. (McMaster), Ph.D. (Wales), P.Eng.—1980. (Head of the Department)
Gaspar, Robert George Stephen; B.A.Sc., M.A.Sc., Ph.D. (Windsor)—1983.
Alpas, Ahmet T.; B.Sc., M.Sc. (Middle East Tech.), Ph.D. (Open Univ. U.K.)—1989.
Sokolowski, Jerzy Hieronim; M.M.E., Ph.D. (Tech. U. of Silesia)—1993. (Ford-NSERC Industrial Chair in Light Metals Casting)
Zhang, Chao; B.Sc., M.Sc. (Xi'an Jiaotong), Ph.D. (UNB), P.Eng.—1990.
Yuan, Jing; B.S. (North Jiao-Tong), M.S. (Akron), Ph.D. (Victoria)—1993.
Chao, Benjamin S.; B.S., M.S., Ph.D. (Syracuse)—1990.
Hageniers, Omer L.; B.A.Sc., M.A.Sc., Ph.D. (Windsor), P.Eng.—1973.
Knalighi, Bahram; B.S. (Arya-Mehr), M.S., Ph.D. (Iowa)—1993.
Kumar, Kurichi R.; B.E. (Madras), M.A.Sc., Ph.D. (Windsor)—1993.
Pryor, Timothy R.; B.E.S. (Johns Hopkins), M.S. (Illinois), Ph.D., D.Sc. (Windsor)—1973.
Yamauchi, Hisao; B.Eng. (Tokyo), M.S., Ph.D. (Northwestern), P.Eng.—1980.
Barron, Ronald Michael; B.A., M.Sc. (Windsor), M.S. (Stanford), Ph.D. (Carleton)—1975.
Zamani, Nader G.; B.Sc. (Case Western), M.Sc., Ph.D. (Brown)—1986. El Maraghy, Hoda A.; B.Eng. (Cairo), M.Eng., Ph.D. (McMaster), P.Eng.–1994. (Dean of the Faculty)
El Maraghy, Waguih; B.Eng. (Cairo), M.Eng., Ph.D. (McMaster), P.Eng.–1994.
Students may take a regular program in Mechanical Engineering, or they may specialize in the Engineering Materials Option described below.
Mechanical engineers are responsible for the design, construction, maintenance, and operation of machines and systems of machines. They create, plan, do research, supervise, analyze, and generally act as the professionals of mechanical technology.
The mechanical engineer's knowledge and skills are needed in many industries, such as: heating, ventilating, and air conditioning; transportation; power generation and distribution; metal production and processing; pulp and paper manufacturing; and chemical and electrical equipment. Mechanical engineers commonly go beyond the limits of purely mechanical work. They are found at all levels of management in private industry and the public sector.
Students in the regular program may specialize by selecting four elective courses. These courses may be selected from those offered in the areas of: air conditioning; dynamics and stress analysis; vibrations and noise; and gas dynamics and turbomachinery.
Students interested in the Engineering Materials Option are able to begin their specialized studies in the Summer term of their third year. The Option includes a series of four required and two elective courses. Engineering Materials courses include modern developments in such areas as lightweight composites, high temperature materials, surface treatments, materials with special electrical, optical, and/or magnetic properties, and novel processing techniques.
Note: The baccalaureate degree program in Mechanical Engineering is accredited by the Canadian Engineering Accreditation Board of the Canadian Council of Professional Engineers.
The Fall and Winter terms are common to all Engineering program (see 8.4.1). In the Summer term, Co-op students also will register in 85-198 (Work Term I).
|
Lect. |
Lab |
Wt. | |
|
85-211.(Comp.-Aided Analysis II) |
3 |
1.5 |
3.75 |
|
85-212.(Thermodynamics I) |
3 |
1.5 |
3.75 |
|
85-214.(Networks & Systems) |
3 |
1.5 |
3.75 |
|
85-217.(Mech. of Def. Bodies I) |
2 |
2 |
3.00 |
|
92-210.(Dynamics) |
3 |
2 |
4.00 |
|
62-215.(Vector Calculus) |
3 |
1 |
3.50 |
|
Lect. |
Lab |
Wt. | |
|
85-222.(Treatment of Expt. Data) |
3 |
1 |
3.50 |
|
85-233.(Fluid Mechanics I) |
3 |
1 |
3.50 |
|
87-227.(Mech. of Def. Bod. II) |
3 |
2 |
3.00 |
|
92-222.(Comp.-Aided A & D) |
3 |
2 |
4.00 |
|
41-117.(Intro. Economics) |
3 |
1 |
3.50 |
|
62-216.(Differential Equations) |
3 |
1 |
3.50 |
(Co-op students only)
85-298.(Work Term II)
|
Lect. |
Lab |
Wt. | |
|
85-313.(Engrg. Economy) |
3 |
1.5 |
3.75 |
|
92-220.(Machine Dynamics) |
3 |
2 |
4.00 |
|
92-315.(Mechanical Vibrations) |
3 |
2 |
4.00 |
|
92-316.(Heat Transfer I) |
3 |
2 |
4.00 |
|
92-317.(Applied Thermodyn.) |
3 |
2 |
4.00 |
|
92-320.(Fluid Mechanics II) |
3 |
2 |
4.00 |
(Co-op students only)
85-398.(Work Term III)
|
Lect. |
Lab |
Wt. | |
|
92-311.(Stress Analysis I) |
3 |
2 |
4.00 |
|
92-321.(Control Theory I) |
3 |
1 |
3.50 |
|
92-322.(Comp.-Aided A & D) |
2 |
3 |
3.50 |
|
92-324.(Engrg. Measurements) |
3 |
3 |
4.50 |
|
92-326.(Heat Transfer II) |
2 |
2 |
3.00 |
|
92-401.(Project and Seminar) |
0 |
6 |
6.00 |
|
Lect. |
Lab |
Wt. | |
|
89-330.(Materials & Properties) |
3 |
2 |
4.00 |
|
89-331.(Thermo. & Kinetics) |
3 |
2 |
4.00 |
Materials Technical Elective **
|
Lect. |
Lab |
Wt. | |
|
92-311.(Stress Analysis I) |
3 |
2 |
4.00 |
|
92-321.(Control Theory I) |
3 |
1 |
3.50 |
|
92-326.(Heat Transfer II) |
2 |
2 |
3.00 |
(Co-op students only)
85-498.(Work Term IV)
|
Lect. |
Lab |
Wt. | |
|
92-401.(Project & Seminar) |
0 |
6 |
6.00 |
|
92-411.(Machine Design I) |
2 |
3 |
3.50 |
|
42-200.(Resource Mgmt.) |
3 |
0 |
3.00 |
Mechanical Technical Elective*
Mechanical Technical Elective*
Non-technical Elective (see 8.10.1)
|
Lect. |
Lab |
Wt. | |
|
89-401.(Project & Seminar) |
0 |
6 |
6.00 |
|
89-420.(Ceramic Materials) |
3 |
1 |
3.50 |
|
89-421.(Deformation & Fracture) |
3 |
2 |
4.00 |
|
92-411.(Machine Design I) |
2 |
3 |
3.50 |
|
42-200.(Resource Mgmt.) |
3 |
0 |
3.00 |
Non-technical Elective (see 8.10.1)
|
Lect. |
Lab |
Wt. | |
|
85-421.(Engrg. and Society) |
3 |
0 |
3.00 |
|
92-412.(Control Theory II) |
2 |
3 |
3.50 |
|
92-421.(Machine Design II) |
2 |
3 |
3.50 |
|
92-459.(Comp.-Aided Anal. Tools) |
2 |
3 |
3.50 |
Mechanical Technical Elective*
Mechanical Technical Elective*
|
Lect. |
Lab |
Wt. | |
|
85-421.(Engrg. and Society) |
3 |
0 |
3.00 |
|
92-322.(Comp.-Aided A & D) |
2 |
3 |
3.50 |
|
92-324.(Engrg. Measurements) |
3 |
3 |
4.50 |
|
92-421.(Machine Design II) |
2 |
3 |
3.50 |
|
89-401.(Project & Seminar) |
0 |
6 |
6.00 |
Materials Technical Elective**
* Not all Mechanical Technical Electives are given each year or in both terms.
|
Lect. |
Lab |
Wt | |
|
92-450.(Gas Dynamics) |
2 |
1.5 |
2.75 |
|
92-451.(Turbomachines) |
2 |
1.5 |
2.75 |
|
92-452.(Energy Conversion) |
2 |
1.5 |
2.75 |
|
92-453.(Air Conditioning) |
2 |
1.5 |
2.75 |
|
92-454.(A/C Systems Design) |
2 |
1.5 |
2.75 |
|
92-455.(Noise) |
2 |
1.5 |
2.75 |
|
92-456.(Mechanical Vibration II) |
2 |
1.5 |
2.75 |
|
92-457.(Dynamics) |
2 |
1.5 |
2.75 |
|
92-458.(Stress Analysis II) |
2 |
1.5 |
2.75 |
** Not all Materials Technical Electives are given each year or in both terms.
|
Lect. |
Lab |
Wt. | |
|
89-430.(Materials Degradation) |
3 |
1 |
3.50 |
|
89-431.(Electronic Materials) |
3 |
1 |
3.50 |
|
89-432.(Modern Steels) |
3 |
1 |
3.50 |
|
89-433.(Phys. Metallurgical Proc.) |
2 |
2 |
3.00 |
|
89-434.(Polymers) |
3 |
1 |
3.50 |
Topics in dynamics of rigid bodies. Forces and accelerations, energy and momentum methods for rigid bodies in plane motion. Motion of rigid bodies in three dimensions. (Prerequisite: 85-122.) (3 lecture, 2 tutorial hours a week.)
Linkages of flexible connectors, cams, toothed gearing, intermittent motion mechanisms, trains of mechanisms, static and dynamic analysis of mechanical flywheels, balancing of rotating and reciprocating masses. (Prerequisite: 92-210.) (3 lecture, 2 tutorial hours a week.)
Simulation and analysis of lumped parameter systems; parameter optimization in a design study using numerical solutions to the governing equations; introduction to computer-aided design packages. (Prerequisite: 85-211.) (3 lecture, 2 laboratory or tutorial hours a week.)
Theory of failure, stress concentration, energy methods, curved beams, thick cylinders, flat plates, torsion of noncircular sections. Introduction to finite element methods. (Prerequisiste: 87-227.) (3 lecture, 2 laboratory hours a week.)
Free, damped, and forced vibration of single and multi-degree of freedom systems with discrete masses. Exact and approximate methods of solution. Vibration isolation, vibration transducers, use of computers in vibration analysis. (3 lecture, 2 tutorial hours a week.)
Introduction to conduction, convection, and radiation. Steady state and transient system analysis using both exact and approximate solution techniques. (3 lecture, 2 laboratory hours a week.)
Ideal gas mixtures and psychrometrics. Reacting mixtures and combustion. Power cycles, refrigeration and heat pump cycles. (Prerequisite: 85-212.) ( 3 lecture, 2 laboratory/tutorial hours a week.)
Navier-Stokes equations and some exact solutions, external flows boundary layer over a flat plate, drag forces; turbulent flows in pipes and mixing length theory, flow measurement, compressible flows and introduction to potential flows. (Prerequisite: 85-233.) (3 lecture, 2 laboratory/tutorial hours a week.)
Control system concepts, linear modelling and analysis of response and stability of physical systems, complex variables and Laplace transforms, frequency, and transient response analysis and performance specifications. (Prerequisites: 62-215 and 62-216.) (3 lecture hours, 1 tutorial hour a week.)
Computer based and classical optimization techniques including Lagrange multipliers, search methods and geometric, linear and dynamic programming with application to the analysis and design of thermo-fluid systems. (Prerequisites: 92-222 and 92-317.) (2 lecture, 3 laboratory/tutorial hours a week.)
Basic concepts in instrumentation; error analysis; instrumentation and measurement systems including sensors, transducer, signal conditioning and display; microcomputer-based data acquisition and analysis. (Prerequisite: 85-222.) (3 lecture, 3 laboratory/tutorial hours a week.)
An extension of the fundamentals introduced in 92-316 with applications involving the synthesis, design and optimization of heat exchange equipment. (Prerequisite: 92-316.) (2 lecture, 2 laboratory/tutorial hours a week.)
Each student working either individually or in a small group shall undertake an assigned project during the third and fourth years of study. If a student wishes to undertake a project of his or her own choice, such a project must be approved by the Department Head. (6 laboratory hours a week; offered over two terms.) (A 6.0 credit hour course.)
Philosophy of machine design. Design factor/reliability relationships. Contemporary fatigue analysis, including low- and high-cycle, triaxial state of non-reversed stress and fatigue damage, with applications of selected mechanical elements. (Prerequisite: 92-311.) (2 lecture, 3 laboratory hours a week.)
Design of compensators, non-linear control systems, describing function, phase plane, analogue and digital simulation, limit cycles, digital control, D-A converters, z-transforms, sequential control. (Prerequisite: 92-321.) (2 lecture, 3 laboratory/tutorial hours a week.)
The principles of machine design and the design of machine elements. Major emphasis is placed on reliability, fatigue and fracture design using a case study approach. Design topics are selected from: bearing lubrication, springs, fasteners, flexible machine elements and power transfer systems. (Prerequisite: 92-411.) (2 lecture, 3 tutorial hours a week.)
Three-dimensional graphics; fundamentals of finite element methods for problem solving in heat transfer, solids, and trusses using finite element computer programs. (Prerequisite: 92-222.) (2 lecture, 3 laboratory/tutorial hours a week.)
Some of these courses may not be offered in any given year.
Basic concepts and flow equations, one dimensional flows, isentropic flows in variable area ducts, constant area duct flows, Fanno and Rayleigh lines, normal shock, nozzles and diffusers, oblique shock, measurements. (Prerequisite: 92-320.) (2 lecture, 1.5 tutorial hours a week.)
Dimensional analysis and similitude; definitions of efficiency, two dimensional analysis of axial flow turbines and compressors, three dimensional flow, centrifugal pumps and compressors. (Prerequisite: 92-450.) (2 lecture, 1.5 laboratory/tutorial hours a week.)
Survey of energy resources and their availability. Energy conversion systems, their operating characteristics, capabilities and limitations. (Prerequisite: 92-317.) (2 lecture, 1.5 tutorial hours a week.)
Principles of environmental comfort control, applied psychrometrics, load calculations, air distribution system design. (Prerequisite: 92-317.) (2 lecture, 1.5 laboratory hours a week.)
Computer methods in energy analysis and duct design, heat recovery devices, capital and operating costs. (Prerequisite: 92-453.) (2 lecture, 1.5 laboratory hours a week.)
Physical properties of sound and noise, measurement of noise, noise control, hearing characteristics and environmental effects of noise. (2 lecture, 1.5 tutorial/laboratory hours a week.)
Vibration of bodies with distributed mass. Exact and approximate methods of solution. Whirling of shafts. Vibration maintenance engineering. Introduction to non-linear vibration. (Prerequisite: 92-315.) (2 lecture, 1.5 tutorial/laboratory hours a week.)
Kinematics of particles and rigid bodies. Dynamics of particles, systems of particles and rigid bodies, with applications to engineering problems. The gyroscopic effect. Introduction to variational methods. Lagrange's equations, Hamilton's principle. (2 lecture, 1.5 tutorial hours a week.)
Two-dimensional theory of elasticity, torsion of non-circular sections, and methods of experimental stress analysis. (Prerequisite: 92-311.) (2 lecture, 1.5 tutorial/laboratory hours a week.)
Other electives may be chosen in consultation with the Department members and approved by the Department Head.
Courses taken in other Engineering departments will be found in the departmental listing for those particular courses; for courses in General Engineering, see 8.5; for non-Engineering courses, see 8.10.